Glock accessories, Glock Parts

virtualcart secure Glock accessory and parts orders

 Performance Glock

Glock Parts Disassembly

Frame

push the trigger pin out of the frame.

Glock Parts Disassembly Step 1: The slide stop lever is spring loaded into a groove in the trigger pin. "Jiggle" the slide stop lever while pushing on the trigger pin until you can feel the trigger pin start to move. Then, push the trigger pin out of the frame. Push the upper pin out as well if it is present.

 

Click Here - Next Step >>>

<<< Click Here - Go Back a Step

Click Here - Go to the Disassembly start  page

Click Here - Go Home

 

 

Skip to Glock Frame Disassembly Instruction:

  1. Glock Parts - Position the slide stop lever
  2. Glock Parts - Remove the Slidestop Lever
  3. Glock Parts -  Push the locking block pin out of the frame
  4. Glock Parts -  Preparation for removing the slide lock
  5. Glock Parts -  Pull the slide block out of the frame
  6. Glock Parts - Replacing the slide block
  7. Glock Parts -  Pry the locking block out of the frame
  8. Glock Parts -  Push out the trigger housing pin
  9. Glock Parts -  Remove the trigger housing
  10. Glock Parts -  Finish Removing the trigger assembly
  11. Glock Parts -  Rotate the trigger bar
  12. Glock Parts -  Disconnect the trigger spring
  13. Glock Parts -  Remove the connector
  14. Glock Parts - Trigger housing

Skip to Glock Slide Disassembly Instruction:

  1. Glock Accessories - Push down the polymer spacer sleeve

  2. Glock Accessories -  Slide the slide cover plate off the slide
  3. Glock Accessories -  Remove the firing pin
  4. Glock Accessories -  Remove the extractor spring
  5. Glock Accessories -  Depress the firing pin safety
  6. Glock Accessories -  Rotate the extractor out of the slide
  7. Glock Accessories -  Remove the firing pin safety
  8. Glock Accessories - Disassembled Glock Slide
 

© 2002-2007 Glock Parts all rights reserved